5 tips to prevent roof leaks during the rainy season

Are you tired of having to deal with water in your home every time it rains? A leaky roof can not only damage your roof but also cause electrical hazards. The main causes of roof leaks are — - Cracks in the roof tiles - Cracks in the gutters So, before the rain starts, you should check them in advance and protect them with these 5 tips. 1. Patch the roof tiles and cracks with Bitumen Tape Just stick bitumen tape on the small cracks in the roof tiles and roof tiles to immediately reduce water leakage. 2. Use Acrylic Waterproofing For concrete roofs (Slabs) and gutters, waterproofing is more reliable. 3. Replace worn screws Use new screws with EPDM rubber seals to reduce water infiltration. 4. Remove rust and dust Before applying the sealant, clean the surface with a wire brush. No matter how good the sealant is, if the surface is not clean, it will come off after a while. 5. Only apply when the surface is completely dry Applying tape or painting while it is wet can weaken the adhesion. If you are using tape, press it firmly with your hands or a roller to prevent air bubbles from forming in the tape. If you apply it in the sun (when the surface is hot), the tape will be softer and more durable. When applying the sealant, it is better to apply it in at least (2) coats, not in one coat. Wait for the first coat to dry completely (at least 4 to 6 hours). When painting the second floor, paint it crosswise (in the same direction as the first floor). This will ensure a thicker and safer finish. Products recommended by PRO 1 -Sika Multiseal Gray(100mmx3m) -Crocodile Roof Shield Water Proofing Pre-treatment before the rain can help protect your home from water leaks .